Professional Hunting Dog Training Collar with Remote 1.25 Mile Control
The TRAINERTEC DT4200 Remote Hunting Dog Training Collar 1.25 mile range This model also supports a number of dogs - up to 2, with the purchase extra DT4200 Collar. Designed in the field by hunters and dog trainers just like you, the DT4200 allows you to communicate with your dog using tone, vibration, or one of the 99 levels of static stimulation. The remote is designed to be operated without having to look at it, needing only a slight movement of the dial and the push of a button to deliver stimulation. This customizability and ease of use ensure your training is consistent, immediate, and tailored to your dog’s unique personality.
Contact us directly: soka@sztrainertec.com
SPECIAL FEATURES | Designed for high-drive, more stubborn dogs, hunting dog |
RANGE | Up to 2200 yards (2000 meters) |
STIMULATION RANGES | 99 levels of static stimulation(8 seconds safe static shock protection)Option to train with vibration and tone |
EXPANDABLE SYSTEM | 2 dogs training with 1 Remote Transmitter |
WATERPROOF | Transmitter: IP6 ; Receiver: IP7 ,dog can swim freely |
DOG SIZE | Don't use the collar on a dog that is under 10 pounds or 4 months of old75cm Adjustable TPU strap |
BATTERIES | Rechargeable lithium-ion batteries for Transmitter and Receiver |
HIGH LIGHT LED | YES, red and white led high light on the collar |
LOW BATTERY INDICATOR | YES |
PRODUCT DIMENSIONS | Receiver without strap - 9 X 3.5 X 3 cmRemote Transmitter with Antenna- 15 X 4 X 2.7 cm |
WARRANTY | 2 Years |
Main Features
- Intensity dial with 99 levels of adjustment
- Ultra-Compact Receiver Suitable for small, medium, and large dogs
- Three training modes: Momentary/Continuous Static, Beep, Constant Vibration
- Low to Medium Power Training Levels for training even the most sensitive of dogs
- Dog collar receiver and transmitter are Fully Waterproof- -Highlight LED function can find pet from 200~300 meters away at night.
- 2-Hour Rapid Charge Batteries
- Enhanced Contact Points
Product Description
TRANSMITTER BUTTON FUNCTIONS
On/Off button
Hold this button for 2 seconds to switch on the power, then the LED will display the default “01”.
You may change your Dog ID by moving the Dog Selection Button.
Hold this button for 2 seconds to switch off the power.
Dog selection button
Move up to choose the first dog , The LED screen display “1” ;
Move down to choose the second dog, and the LED screen display “2”
Shock Adjust&Lock Switch
Rotate the switch to adjust the shock intensity from levels 0 to 99
Press the switch to lock the shock level, and press the switch again to unlock the shock level.
Highlight Led buttons
Press one time, the receiving collar led flash 1 time ;
Press and hold on the button for 3 seconds, the receiver collar will highlight
flash 5 times then flash 1 time per 3 seconds continuously.
LED display
Display the shock,beep, or vibration mode; display the shock level, lock or unlock shock status,dog ID , battery status
The transmitter has memory functions to save suitable shocks for different dogs. 99 levels of shock stimulation, and 1 level of vibration stimulation. One tone.
Dog Receiver Collar
DC Jack Cover
Open the Rubber Cover and insert the adaptor plug into DC Jack to charge.
Contact Prong
Choose a short or long prong to match the dog’s coat type.
LED Light
Indicate the working status, low battery , charging status.
High Light Led
1st Dog Light = White
2nd Dog Light = Red
On/Off Button
Turn On The Collar = Press and hold on for 4 seconds.
2 “beep” sounds and the collar green LED light will flash 1 time per 5 seconds if connected. The LED will flash fast if disconnected.
Turn Off The Collar = Press and hold on for 4 seconds.
1 long tone will sound and the green LED light will stop flashing and turn off.
MATCH A RECEIVER
To add a receiver collar to your remote dog training system, follow the below steps.
STEP 1: Take out 1 unmatched receiver collar and transmitter. Turn on Them.
STEP 2: If you want to match the 1st dog, please choose first dog , The LED display “1”
If you want to match the 2nd dog, please choose the second dog, the LED display “2”
STEP 3: Hold the transmitter close to the unmatched receiver 1 to 2 inches away. Press and hold the VIBRATION BUTTON
and HIGHLIGHT LED BUTTON at the same time until the LED display is “P”. Not to release the 2 buttons.
STEP 4: Once hearing 5 “beeps” sound from the receiver. Then release the button. The receiver matched and will begin flashing Green Led Light once every 4-5 seconds.
(NOTE: If the receiver didn’t connect, please repeat STEP 3 to STEP 4. Try to close to the receiver from different directions and closer.)
STEP 5: Test matched Receiver Functions Press the Vibration button, Beep button to test the reaction of the receiver collar. Press the stimulation button to test the receiver by Test Light
1. Insert the contact points into the Test Light.
2. Press a stimulation button on the remote transmitter.
3. The Test Tight will flash.
4. Turn the collar receiver off.
5. Save the Test Light for future testing.
Note: If the Test Light does not flash, recharge the battery and re-test. If you need, you can also put it on the lowest setting and test on the back of your hand/arm for confirmation if you’re still unsure.
CANCEL A MATCHED RECEIVER
STEP 1: Turn On the matched Receiver and transmitter.
STEP 2: Hold the transmitter next to the receiving collar 1 to 2 inches away. Press and hold the "BEEP BUTTON" and "HIGHLIGHT LED BUTTON" at the same time, until the LED display is “U” . Do Not release the two buttons.
STEP 3: Once hearing 5 “beep” sounds from the receiver. The receiver is unmatched and will begin flashing Green Led Light
frequently. Then release the button.
If the receiver didn’t cancel the match, please repeat STEP 2 to STEP 3 . Try to close to the receiver from different directions and closer.
OPERTATE HIGH LIGHT LED
Your remote trainer has 2 colors(white, and red ) of high-light LED. You can find out your pets from 200-300 meters away in dark night without the remote control.
To get a highlight flash on dark nights, you must match the receiving collar to the transmitter first.
Press the Highlight Led button of the Transmitter one time, the receiver collar will highlight flash 1 time per 3 seconds continuously.
Press the Highlight Led button again, The highlighted LED will be on, Then Press the Highlight Led button again, The highlighted LED will be off.
You match different dog receive collars, you can get different high light flashes.
The 1st dog = White highlight Led
The 2nd dog =Red highlight Led
Product packaging
CONTENTS
1* Toolbox
1*Transmitter
1*Receiver Collar
1*5V1000mA DC Adaptor
1*5V1A Car Travel Charger
1*TPU Strap
1*2 Pins USB Cable
1*Lanyard for Transmitter
1*Manual
2*Long Prongs (10mm)
2*Short Prongs(15mm)
1*Spanner for changing prong
1* Test light
1*Paper box
Toolbox
STANDARD PACKING
BOX SIZE: 28.5X24X8.6CMWEIGHT: 1.5KG/PCS
CARTON SIZE/PCS: 58*25*45 CM (10PCS)
OEM SERVICE:
1. PACKING BOX CUSTOMIZE, 2. BRAND LOGO ON RECEIVER, COLLAR, TRANSMITTER
3. COLORS CUSTOMIZE,
MORE... ... AS REQUEST
OEM/ODM service
1. Professional R&D and design team
2. ID design
3. Function design, layout
4. Custom materials, processing
Main features
Multimedia
Dimensions
No reviews found