DP Series transfer printing machines are produced with 3 different drum diameter and 3 different drum width options as follows; Ø400 / Ø600 / Ø1000mm cylinder diameter and 1900/2200/3300 mm. Offers multiple configuration options to help easing the producing process. DP Series machines are more industrial machines than the MP Series, with bigger drum sizes and width options, thus increasing the printing speed accordingly. DP Series are capable to work with both rolls and pieces. Is an excellent transfer printing machine choice for bigger businesses, as it offers an exceptional printing experience and convenience for the users.

DP-19B400C | Ø400mm x 1900mmDP-22B400C | Ø400mm x 2200mmDP-26B400C | Ø400mm x 2600mmDP-33B400C | Ø400mm x 3300mmDP-19B600C | Ø600mm x 1900mmDP-22B600C | Ø600mm x 2200mmDP-26B600C | Ø600mm x 2600mmDP-33B600C | Ø600mm x 3300mmDP-19B1000C | Ø1000mm x 1900mmDP-22B1000C | Ø1000mm x 2200mmDP-26B1000C | Ø1000mm x 2600mmDP-33B1000C | Ø1000mm x 3300mm

OPERATION TYPES

• Digital Paper Rolls to Pieces of Fabric
• Digital Paper Rolls to Rolls of Fabric
• Digital Paper Pieces to Pieces of Fabric

OTHER SCOPES OF USE

• Film Lamination
• Serigraphy Transfer Printing
• Offset Printing
• Flock Transfer
• Stone Printing

DRUM SPECIFICATIONS

The drum is made of ST44 drawn steel pipe and all standard models are finished with surface grinding. On request the drum surface can also be plated with either chrome or Teflon. Inside the drum is one single heating unit that consists of three pieces. The drum is filled with transfer heating oil that fills up 60% of the inner volume. The failsafe-switch mechanism helps balance the inner pressure, and will deactivate the machine should there be any issues regarding the gasses generated by heated oil so to avoid injury or damage. The heat sensor is placed on the surface of the drum, this enables more accurate readings and provides better print results. Maximum Working Temperature and Temperature Restrictions can be easily adjusted via the Touch-Screen Panel.

FELT SPECIFICATIONS

All of our machines are equipped with 100% Nomex seamless industrial felt belts that are reinforced with Kevlar material in order to avoid stretching. The expected lifetime for the belt on this unit is between 3 & 5 years depending on use. In order to eliminate movement of the felt belt to either side the machine is built with an automated-felt centering mechanism. The felt tension and the felt centering system are both airoperated (Pneumatic). Should the compressor fail to supply the required air for the system, the machine halts and alerts the operator to prevent lasting damage to the belt.

TOUCH SCREEN CONTROL PANEL

• General control of the machine such as speed, temperature etc.
• Metre Counter
• Weekly Programming
• Auto- Cooling
• Touch-screen to Access various functions

MATERIAL INPUT / OUTPUT CONTROLS

Protection Paper

• Input      : Manually Adjusted Brake System
• Output   : Manually Adjusted Automatic Rewind

Digital Paper

• Input      : Manually Adjusted Brake System
• Output   : Manually Adjusted Automatic Rewind

Roll Fabric

• Input      : Manually Adjusted Fabric Tension System
• Output   : Manually Adjusted Automatic Rewind

Piece Fabric

• Input      : Manually laid on table
• Output   : Off the protection paper