MP Series transfer printing machines are produced with fixed Ø320mm cylinder diameter and 4 different cylinder width options as 1300/1700/1900/2200mm. Its usage areas are jersey printing, children’s wear, promotional items and so on. The MP series has been designed for small and medium-sized textile workshops, aiming to reduce the use of outsourcing, and to perform their production in-house. With its compact design that does not take up much space, it can be easily set up in production areas that are not too large. It is the best choice for businesses that will work as both piece and roll printing.

MP-13B320C | Ø320mm x 1300mmMP-17B320C | Ø320mm x 1700mmMP-19B320C | Ø320mm x 1900mm

OPERATION TYPES

• Digital Paper Rolls to Pieces of Fabric
• Digital Paper Rolls to Rolls of Fabric
• Digital Paper Pieces to Pieces of Fabric

OTHER SCOPES OF USE

• Serigraphy Transfer Printing
• Offset Printing
• Flock Transfer

DRUM SPECIFICATIONS

The drum is made of ST44 drawn steel pipe and all standard models are finished with surface grinding. On request the drum surface can also be plated with either chrome or Teflon. Inside the drum is one single heating unit that consists of three pieces. The drum is filled with transfer heating oil that fills up 60% of the inner volume. The failsafe-switch mechanism helps balance the inner pressure, and will deactivate the machine should there be any issues regarding the gasses generated by heated oil so to avoid injury or damage. The heat sensor is placed on the surface of the drum, this enables more accurate readings and provides better print results. Maximum Working Temperature and Temperature Restrictions can be easily adjusted via the Touch-Screen Panel.

FELT SPECIFICATIONS

100% Nomex industrial felt, which is reinforced with kevlar raw material and does not stretch under any circumstances, is used as felt in all of our machines. The life of the felt varies according to the usage, and the average life is between 1 and 3 years. There is an automatic felt centering system to prevent the felt from slipping to the right or left. The felt tensioning and centering system is pneumatic, and when the air does not come to the machine from the air compressor, the machine automatically slows down to protect the felt and the felt rotates forward for a certain time, then backwards and the machine cools down.

TOUCH SCREEN CONTROL PANEL

• General control of the machine such as speed, temperature etc.
• Metre Counter
• Weekly Programming
• Auto- Cooling System
• Error Alerts
• Controlling Machine Settings

MATERIAL INPUT / OUTPUT CONTROLS

Protection Paper

• Input      : Manually Adjusted Brake System
• Output   : Automatic Winding with Pneumatic Adjustment

Digital Paper

• Input      : Manually Adjusted Brake System
• Output   : Manually Adjusted Automatic Rewind

Roll Fabric

• Input      : Manually Adjusted Fabric Tension System
• Output   : Automatic Winding with Pneumatic Adjustment

Piece Fabric

• Input      : Manually laid on table
• Output   : Off the protection paper